AQUARTICLES•COM


Please read the 'Agreement' section on the View Articles page before downloading this article.

 

 
ARTICLE INFORMATION
Author: Majid Ali
Title: Time to Bamboo the Aquarium
Summary: Like bogwood, bamboo shoots can be sealed with polyurethane, and connected with silicone sealer.
Contact for editing purposes:
email: David Marshall, Editor, Ryedale Reporter: davidplaty@davidmarshall5.wanadoo.co.uk
Date first published: January 2006
Publication: Ryedale Reporter.
Reprinted from Aquarticles:		 ARTICLE USE: 
Internet publication (club or non-profit web site):
   1. Credit author, original publication, and Aquarticles.
   2.  Link to http://www.aquarticles.com  and original
        website if applicable.
   3.  Advise Aquarticles
Printed publication:
Mail two printed copies to:
David Marshall,
16 Potter Hill,
Pickering.
North Yorkshire
YO18 8AA
England
And one copy to:
Aquarticles.com
#205 - 5525 West Boulevard
Vancouver, British Columbia
V6M 3W6
Canada

Time to Bamboo the Aquarium

By Majid Ali
of the Ryedale Aquarist Society, England
Auarticles.com

In conjunction with bogwood I like to use bamboo shoots, as I feel that they give a unique appearance in my aquariums.

I first used bamboo shoots when housing a pair of rainbow crabs. When both became territorial I split the aquarium, using Perspex which had holes drilled into it for air circulation, into two sections. I experimented by using bogwood and bamboo for shelter and noticed that both were preferred by the crabs.

The bamboo shoots were glued at the bottom to create and maintain a permanent spot. The problem with these crabs is they have to moult from time to time, and when this happens they immediately look for safe sanctuary to prevent themselves from being cannibalised by other crabs or by predators (because at this moment of time they are soft and fleshy, thus easy prey). Therefore the bamboo shoots were used by the crabs for both shelter and safe sanctuary.

I also cut some smaller pieces of bamboo and placed them into another aquarium housing small, thin coolie loaches which managed to squeeze in and out of them, also using them as a resting and hiding place.

Bamboo shoots were used in both coldwater and tropical aquariums - where they were happily accepted by all the residents.

My intention was to make the bamboo long lasting so I performed the following tasks:

1. Coat shoots (you can use a varnish dip for shoots with holes so that the varnish gets inside the wood) with several coats of polyurethane varnish (but you must make sure that the varnish contains no additives - traditional yacht varnish is polyurethane, but has a mousier added which will harm or kill aquarium residents). Untreated bamboo can rot and foul the water. When this occurs it leads to a greater demand for oxygen and an increase in toxic waste products in the aquarium. The rotting plant matter will also create or attract saprophytic fungi.

2. After applying the first coat of varnish I left it to dry for a while and then performed the same task several times to make stronger-water proof bamboo shoots.

3. The shoots were then glued together using silicone sealer specifically made for aquariums. As an alternative string or nylon cord can be used to hold the bamboo sticks together. All kinds of shapes can be created that include triangles and rectangles.

Finally, have a bamboo of an adventure with bamboos!